How it Works
Length x Width + Waste %.
What is Flooring Calculator?
Determines total square footage/meters plus a standard waste factor for cuts.
Step-by-Step Guide
1. Measure Room
Get the max Length and Width of the floor.
2. Add Waste
Add 10% for standard installation, 15-20% for diagonal.
3. Convert to Boxes
Divide total area by the sq ft/m² per box.
4. Round Up
You can't buy partial boxes, so round up.
Example
Input: 5m x 4m
Result: 20 m² (+10% waste = 22 m²)
FAQ
Waste factor?
10% is industry standard.
Carpet?
Requires linear feet calculation based on roll width (usually 12').
Pattern match?
Add extra 10-20% for pattern alignment.
👷 Builder's Tip: Measure twice, cut once. These calculations are theoretical; actual site conditions may affect requirements.
Conclusion
Always buy extra boxes from the same batch (dye lot) to ensure color consistency if repairs are needed later.